Smartctl Open Device Dev Sda Failed Dell Or Megaraid Controller Please Try Adding 39d Megaraid N 39 Extra Quality Apr 2026

When attempting to run smartctl, a popular command-line utility for monitoring and managing disk drives, on a Linux system, you might encounter an error message similar to:

To find the logical drive number, you can use the megacli command, which is a utility provided by LSI (now part of Broadcom) for managing MegaRAID controllers. When attempting to run smartctl, a popular command-line

The error message suggests that the disk drive is behind a RAID controller, which is a hardware component that manages multiple disk drives as a single logical unit. In this case, the controller is a Dell or MegaRAID device. The smartctl utility needs to communicate with the disk drive through this controller, but it doesn't know how to do so by default. The smartctl utility needs to communicate with the

smartctl open device /dev/sda failed: Dell or MegaRAID controller. Please try adding '-d megaraid,N' Look for the logical drive number associated with

megacli -ldinfo -lall This command will display information about all logical drives configured on the MegaRAID controller. Look for the logical drive number associated with the disk drive you want to monitor.

This error typically occurs when smartctl is unable to directly access the disk drive /dev/sda due to the presence of a RAID controller, specifically a Dell or MegaRAID controller.

smartctl -d megaraid,0 /dev/sda In this example, 0 is the logical drive number (N) associated with the disk drive /dev/sda . You may need to adjust this value depending on your specific configuration.